10-17/2025
Abstract: This paper systematically analyzes the causes, common processes and locations of sand hole defects in the sand casting process of BB3 type multistage pump bodies in cast steel parts, and proposes targeted solutions. Through literature review and case analysis, it was found that the defects of sand holes mainly result from insufficient strength of the molding sand, design flaws of the gating system and improper operation, and are prone to occur in the molding, core setting, closing and pouring processes. The specific locations include gates, risers, thick parts of castings and inner cavities. By optimizing the proportion of molding sand, improving the design of the gating system and strengthening process control, the occurrence rate of sand holes can be effectively reduced and the quality of castings can be improved.